ASWP05 Tree Removal
Step Action
Monitor the tree as it falls
Never turn your back to a falling tree
Watch for dead limbs and other objects falling from
trees
Monitor the tree as it strikes the ground as the butt
portion may move towards the saw operator
Ensure that the tree has completely settled before
entering the Hazard Area
Ensure adjacent trees are secure before moving in
to remove rigging or beginning bucking operations
4.4 Limbing Trees
Step Action
Clear spring poles (refer to 4.4.1
Spring Poles)
Determine pressure points on the
limbs
Note: Limbs bent over objects or angled severely will
have explosive pressure associated with them and
must be treated with caution.
Determine tension and compression wood (Figure
5) before performing the cuts
Begin cut
Note: Cut limbs slowly to help ensure a slow release of
the tension.
Ensure body parts are clear of limbs / trunk should
the tree drop or roll after the limb is cut
Monitor the nose of the saw (kickback zone) which
may be impeded by other limbs when removing
limbs
Page 63
