Guides & Toolkits

Arborist Industy Safe Work Practices Guide

This Stream includes all of our Guides & Toolkits Flipbooks.

Issue link: https://www.wsps.ca/resource-hub/i/1490496

Contents of this Issue

Navigation

Page 30 of 163

ASWP03 Ascending Trees 5.0 Inspect Fall Protection Equipment All fall protection equipment shall be inspected prior to ascending a tree (Refer to Appendix A). Step Action Inspect fall protection equipment (e.g. Figure 1) Figure 1 See Appendix A for a sample of fall protection equipment inspection: Inspect fall protection equipment for defects and function before each use Refer to manufacture's instructions for proper inspections Fall protection equipment that arrests a fall must be immediately removed from service Fall protection carabiners with more than 1 mm wear shall be removed from service Arborist life line shall be used exclusively for climbing, except when raising or lowering hand tools 6.0 Placing Arborist Life Line in Tree There are several methods used to place the life line into the appropriate anchor point. From the ground, the worker may utilize a throw ball or bag, throwing knot or noose knot. Sling shot devices are being used increasingly to assist in getting a throw bag high into a tree. Once within the tree, the worker may use a rope poking tool, pole pruner or throwing knot to advance the rope up the tree. Page 31

Articles in this issue

Archives of this issue

view archives of Guides & Toolkits - Arborist Industy Safe Work Practices Guide