ASWPAA Appendix A
Appendix A
SAMPLE FALL PROTECTION EQUIPMENT INSPECTION
Arborist Life Line (Climbing Line) inspection:
Inspect for cuts, abrasion, contamination from dirt, grease, oil etc. It may be necessary to
separate rope fibers for further internal inspection.
Full body harness / climbing saddle inspection:
Inspect for worn and damaged stitching. Inspect for damaged and pulled rivets. Check
webbing for cuts and excessive wear. Look for damage and excessive wear to "D" rings.
Shock absorbing lanyard and work positioning lanyard inspection:
Evaluate lanyards for cuts and abrasion, excessive wear, safety snap function, wear and
damage.
Connecting link inspection:
Carabiners and safety snaps generally have the same components therefore inspection will
be the same. Locking devices shall be checked for function wear and damage. The body of
connecting links shall be examined for cracks, wear and deformities. Dry graphite lubricant is
recommended for moving parts.
Inspection of climbing spurs:
Inspect gaffs for cracks, deformities and proper attachment points. Ensure that the gaffs are
sharp and properly shaped. Check pads, straps, leg irons, stirrups, and sleeves for defects
and wear.
Ensure that climbers are properly adjusted and fitted.
Ladder Inspection:
Only fiberglass or wooden ladders shall be used if there is any possibility of an electrical
contact. Check that all rung braces are tight and that rivets are in place. Inspect the rung locks
on extension ladders to ensure they move freely. Lubricate moving parts and springs. Ensure
that rung locks catch over the rungs. Safety shoes must be in place and moving freely.
Inspect pulley on extension ladders for function and wear. Replace parts if necessary.
Defective ladders shall not be used.
Note: These inspection items are in addition to and do not replace the manufacturers'
suggested inspections.
Page 145
