ASWP15 Clearing Saw Operation
Step Action
Start saw • Ensure saw blade is not touching the
ground or obstacles
• Maintain a firm grip on the saw
Cold Start
• Start saw on ground following
manufacturer's instruction
Warm Start
On the back of the operator using a
second person
Assistant moves away from operator when
started
5.2 Cutting Operation
Step Action
Start cutting
Monitor blade location
Ensure all workers maintain 10 metres
away from operator
Do not cut brush above shoulder height
Brush greater than 10 cm (4 inches) DBH
must not be cut with a brush saw
Monitor terrain to ensure good traction
while cutting
Cut with the appropriate side of blade;
refer to the manufacturer's instruction
Ensure the blade is operating at full
speed before cutting
Page 133
