ASWP12 Chain Saw Operation
A hot chain saw shall be placed on a log, stump or on bare ground, rather than in dry
litter or slash
Smoking, open flames, or other sources of ignition, are prohibited within 3 metres (10
feet) of the fuelling area
Approved firefighting equipment shall be available
When chain saws are stored or being carried a long distance, the chain should be
guarded
Chain saws shall be carried at the workers side with the guide bar pointed to the rear
When not in use, the chain saw shall be turned off and placed in a location where it is
clear of the work site and it will not be damaged by falling limbs
Ensure manufacturer's instructions are readily available and have been understood by
the operator
5.0 Work Practice
The following information will provide general information that is required when working with
chain saw.
Note: Refer to owner / operator manuals for specific chain saw operation / maintenance.
5.1 Pre-operational Checks
Step Action
Inspect Personal Protective Equipment
(PPE) (Figure 1)
Figure 1
Inspect and wear the following personal
protective equipment (PPE), appropriate for
the circumstance:
Head protection
Hearing protection
Eye protection
Hand protection
Chain saw leg protection
Foot protection
Page 114
