ASWP11 Aerial Device Operation
Step Action
Place body of saw into branch union of tree if
available
Ensure saw bar will be clear of branches/foliage
Ensure area below saw is clear
Keep saw below lip of bucket.
Always start saw from the outside of the bucket
structure
Secure footing in bucket
Grasp handle securely
Pull starter cord and push saw down and away
from the bucket
Perform cut
Ensure good footing inside the bucket
Maintain Limits of Approach to electrical
apparatus
Keep all cuts below shoulder level
Maintain proper body positioning, try not to over
extend body
Move aerial device to make body positioning
easier
Ensure appropriate cuts are used
Shut off saw
Apply chain brake
Replace chain saw in scabbard
Relocate aerial device
Maintain Limits of Approach, to electrical
apparatus
Ensure area is clear below cut area
Notify ground person of intentions to move
Secure chain saw between cuts to prevent
falling
5.4 Maintenance of Aerial Device
Step Action
Perform maintenance
• Perform and document maintenance as per
manufacturer's instruction
5.5 Evacuation / Rescue from an Aerial Device
Step Action
Aerial Device Evacuation • Perform Aerial Device Evacuation at least
annually.
Aerial Device Rescue • Perform Aerial Device Rescue at least
annually.
Page 108
