Guides & Toolkits

Large Bale Harvesting Equipment Safety

This Stream includes all of our Guides & Toolkits Flipbooks.

Issue link: https://www.wsps.ca/resource-hub/i/1317292

Contents of this Issue

Navigation

Page 0 of 2

The biggest hazard in working with these large machines is their physical nature. Large bales of hay or straw can weigh from 225kg – 1300kg and these can create additional risks. Pre-Harvest Thoroughly clean baler to remove crop residues, mouse nests and any other debris Lubricate according to manufacturer's specifications Check for loose or missing nuts, screws, guards, or bent teeth Replace missing or damaged guards and shields Inspect belts and chains for evidence of wear or breakage Replace bent or missing pickup teeth Maintain belt tension according to manufacturer's specifications Ensure that hydraulic hoses are clean, in good repair and are hooked up correctly Check twine feeding and cutting mechanisms for proper operation Check slip clutch, roll scraper, and rear gate latch to make sure they are properly adjusted and functioning according to manufacturer's recommendations Check for smooth functioning of the slip clutch, roll scraper, and rear gate latch Check lights, reflectors, and slow moving vehicle (SMV) emblem Ensure there are fully charged fire extinguishers mounted on the trailer and baler LARGE BALE HARVESTING EQUIPMENT SAFETY WSPS.CA

Articles in this issue

Archives of this issue

view archives of Guides & Toolkits - Large Bale Harvesting Equipment Safety